Arrow Lock GL series grade 1 heavy duty levers offer an economically pleasing solution for ADA compliance. The GL solution is designed with the installer in mind, providing fewer subcomponents to allow for an easier to install system. Housing: interlocking lever tubes are constructed from dichromate plated steel. The tubes are attached to the rose insert. This offers improbable give a boost to for a ridged feel without excess movement. Standard bearing sleeves used on most other Arrow lever series don’t seem to be used at the GL. Requires standard 2-1/8-inches bore through door. Thru-Bolts: removable thru-bolts standard on GL Series. OverDrive will allow a locked lever to rotate freely without retracting the latch, making improvements to the life and performance of Arrow locksets. OverDrive: freewheeling lever action occurs when latch retraction mechanism disengages from lever deal with when deal with is locked. Built-in stops within the rose insert prevent lever from traveling beyond approximately 70 degrees. Backset: 2-3/4-inches standard. Latch: stainless steel with 1/2-inches throw standard. Latch housing is steel, zinc dichromate finish for corrosion resistance. 1-inch bore in edge of door is required. Latch front: brass and stainless steel. 2-1/4-inches by 1-1/8-inches, 1/8-inches in 2-inches. Exposed trim: levers are pressure cast zinc. Streamline rose scalp of brass or bronze complements other series of lever locks. Rose inserts: contain coil spring which is a permanent assembly within rose insert. Outside and inside rose scalps are retained by dimples that create an interference fit with the rose inserts that align the scalp. Strikes: brass and stainless steel. ANSI A115.2, 4-7/8-inches by 1-1/4-inches curved lip strike standard. Door thickness: 1-3/8-inches to two- inches. Non-handed. Levers operate bi-directionally.
Interlocking lever tubes are constructed from dichromate plated steel
Freewheeling lever action occurs when latch retraction mechanism disengages from lever deal with when deal with is locked
Built-in stops within the rose insert prevent lever from traveling beyond approximately 70 degrees
Latch housing is steel, zinc dichromate finish for corrosion resistance
5 year limited warranty